Complete Information About Core Cutting

For creating openings for pipes, wires, ventilating or air conditioning vents to fit through, the Core cutting process is to be used. Core cutting must be cautiously planned to prevent going through reinforcement.

CORE-CUTTING MACHINE:

There are the following components of this machine such as;

  • Gear Box
  • Jackscrew
  • Spindle &
  • Electrical Motor
  • Column
  • Water Valve
  • Stand

THE APPLICATIONS:

There are the following applications are available for core-cutting such as…

  1. Core cutting is done to create temporary holes for electrical wiring, plumbing, firefighting systems, rainwater outlets, heating, air-conditioning, and ventilation installations.
  2. Core-cutting can be done on brick walls, RCC walls, black stones, slabs, beams, columns, and water tanks, etc.
  3. All Through RCC Diamond Core-Cutting, applications such as industrial floor cutting, concrete testing, and readymade houses are also made possible.
  4. The core-cutting method can be used to make holes of 2 to 12-inch diameters and up to 2 meters of depth.

DIAMOND EDGE CORE CUTTING:

  1. The diamond cutting system requires fewer attempts and confirms faster operations.
  2. Rebar and metal cutting are possible in the diamond-edge core cutting method and also pre-outage work is possible with this method.
  3. The diamond-edge core cutting method needs only minimal patchwork because it is precise and within the Dimensional tolerance limits.
  4. As the process is free of vibrations and permits a higher amount of concrete removal during cutting and structural integrity is maintained to a higher level.
  5. To the surroundings, diamond cutting is comparatively gentle and non-disruptive.
  6. Just because the concrete is cut to size, in the Diamond Core Cutting process, concrete leaves no dust particles or residues.
  7. The equipment in Diamond-edge RCC core-cutting is controllable and variable enough to be used in remote cutting and closed space areas.

BENEFITS OF CORE CUTTING:

There are the following benefits of this method such as;

  • To drill holes in concrete, core-cutting is a fast, precise, and clean way.
  • It is much faster and efficient, It needs much fewer labor hours which in turn indicates considerably lower operating costs.
  • It is extremely efficient, in generating precise holes and cuttings with minimal or non-existent damage to the surroundings.
  • It removes dust and diminishes the amount of waste.
  • This procedure does not move the vibrations to the nearby constructions and protects them safe and during the drilling operations, it structurally sounds.

Conclusion:

Core cutting is done to create temporary holes for the uses of electrical wiring, plumbing, firefighting systems. Core-cutting is a fast, precise, and clean way.